PAR G5 How to remove headsets to your base station

PAR G5 How to remove headsets to your base station

From time to time you will have to remove headsets from your system. This process is fairly easy. In this article we will show the steps to remove a headset from your drive-thru system.


​

 

How to remove your headset

  1. make sure the headset is turned off

  2. on your base station press MODE

  3. Press 1-2-3-4

  4. Press MODE until the system menu shows on the base station

  5. Select option #4 for Registration and hit enter

  6. In the next menu select REMOVE HEADSET and press enter

  7. In the list, remove the serial for the headset you want to remove

  8. Highlight the serial for removal and press ENTER

  9. Press MODE to go back to the main menu. 







Toll Free: 1-800-263-4996
Telephone: 905-332-4996
Web: soundproducts.ca
Sales: sales@soundproducts.ca
Support: support@soundproducts.ca

    • Related Articles

    • PAR G5 How to connect headsets to your base station

      Headsets have to be configured with your base station before the headset can work with your drive-thru system. In this article we will cover the steps setting up your headset to work with your base station. ​   How to program your headset make sure ...

    • PAR G5 - How to configure a greeter

      Setting up your greeter on the G5 base station is simple process. The greeter stores an audio message that will be played once a vehicle arrives at the outer post. In this article, we will discuss how to setup said greeter for your business. How to ...

    • PAR G5 - How to check your detection

      Here are the steps to check detection on  your base station.  1.  Locate the screws at the bottom of the unit. You might need a flathead screwdriver to loosen these.  3M / Par G5 Base Station Remove Screws 2. Once the screws are removed lift from the ...

    • Identifying your Drive-Thru System 3M / Par G5 and XT1

      Here at Sound Products we answer a lot of support calls. Most of the calls start with one of our team members asking what model of Drive-Thru system our customer has. Usually the answer to this is “I don’t know” – and that is fine! This guide will ...

    • G5 - How To Check Volumes on a Base Station

      Press the mode button on the keypad Press 1-2-3-4 On the screen the customer will see user ID=1 (this indicates a successful login) Press the Enter button (this will take you to the main menu which will have 2 options) System Menu Greeter Menu Cursor ...