Drive-Thru Communications Manuals
Our website is known for having Drive-Thru installation and service
manuals. It only makes sense that our support portal should have all these
manuals in one place for easy reference. Going forward we will start housing additional
manuals here also.
Toll Free: 1-800-263-4996
G5 - How To Check Volumes on a Base Station
Press the mode button on the keypad Press 1-2-3-4 On the screen the customer will see user ID=1 (this indicates a successful login) Press the Enter button (this will take you to the main menu which will have 2 options) System Menu Greeter Menu Cursor ...
Identifying your Drive-Thru System 3M / Par G5 and XT1
Here at Sound Products we answer a lot of support calls. Most of the calls start with one of our team members asking what model of Drive-Thru system our customer has. Usually the answer to this is “I don’t know” – and that is fine! This guide will ...
PAR G5 How to connect headsets to your base station
Headsets have to be configured with your base station before the headset can work with your drive-thru system. In this article we will cover the steps setting up your headset to work with your base station. How to program your headset make sure ...
PAR G5 - How to check your detection
Here are the steps to check detection on your base station. 1. Locate the screws at the bottom of the unit. You might need a flathead screwdriver to loosen these. 3M / Par G5 Base Station Remove Screws 2. Once the screws are removed lift from the ...
Basic Drive-Thru Operation
Basic Drive-Thru operation 1. Detection: When you drive up to the menu board / speaker post at a Quick Service Restaurant you set off a signal from the loop detector that is set off by your car. This sends a signal to the hardwired base station that ...